Reva manufactures a range of Jib Cranes as under:
- Self Supported Pillar/Column mounted Jib Cranes with option of 360 degrees swelling or 270 degree
- Wall mounted Jib Cranes with 270 degree swivelling.
- Travelling cantilever Wall type Jib Cranes Jib Cranes WALL MOUNTED JIB CRANE/TRAVELLING CANTILEVER WALL.
TYPE JIB CRANE
- PILLAR MOUNTED JIB CRANE
- WITH 270O/360O SWIVELLING
These cranes relieve the overhead cranes for carrying out more useful work on the shop floor. Being designed on through FEA, these are extremely reliable & safe. These have standard Reva Electric Wire Rope Hoist for lifting of loads.
The cranes operate at a lower height than the overhead crane, with the lift in the range of 3-5 metres. The lifting capacity could be in the range of 0.5 tonnes to 10 tonnes. (Higher lifts and capacities can also be supplied). The hoisting Speed could be chosen from our standard 3mpm or any desired speeds depending on application.
Jib cranes swivelling could be hand operated, but , electrically operated cranes with Electric Wire Rope Hoists, are the order of the day for increasing production. Rotational speeds of 0.5 rpm are mostly desired, however can be designed as per your requirements.
The Jib Cranes are very versatile in handling material to and from machining bays, small part assembly shops, hammer/press shops, repair bays, etc. compared to overhead cranes, which are meant for handling heavier and bulky material, the Jib Cranes are very useful for faster operations.
Jib cranes require lesser investment than overhead cranes. Apart from the capital cost, the running and maintenance costs are less as Jib Crane parameters can be optimised as per job requirements.
